Resin Ion Exchange Tulsion Thermax A23 India 25Ltr Bag

MACROPOROUS STRONG BASE TYPE I ANION EXCHANGE RESIN
Tulsion® A-27 MP is a highly efficient and durable strong base Type-I macroporous anion exchange resin
having capacity equivalent to gel type anion resin.
Tulsion® A-27 MP belongs to the second generation macroporous ion exchange resins which have a
distinctly different matrix structure from that of the gel type and conventional macroporous resins.
Tulsion® A-27 MP has a controlled pore structure which provides high operating capacity when used in
demineralization of water along with strong acid cation exchanger in hydrogen form in two bed or mixed bed
units.
Tulsion® A-27 MP is capable of reducing both strong and weak acids to very low levels. It is ideally suited for
use in a wide range of pH and temperature conditions. It is supplied in chloride form. This resin has also
better resistance to organic matter.
TYPICAL CHARACTERISTICS
Type Macroporous strong base anion exchange resin
Matrix structure Polystyrene copolymer
Functional group Quaternary amine Type I
Physical form Moist spherical beads
Ionic form Chloride
Screen size USS (wet) 16-50
Particle size (95% minimum) 0.3 to 1.2 mm
Uniformity coefficient 1.7 max
Total exchange capacity 1.2 meq/ml min
Moisture content 58 ± 3%
Swelling (approx) Chloride to OH : 09%
Temperature stability 175 °F (80 °C)
Backwash settled density 670 to 710 g/l
pHrange 0 to 14
Solubility Insoluble in all common solvents

Thermax Limited
TESTING :
The sampling and testing of ion exchange resins is done as per standard testing procedures, namely
ASTMD-2187 and IS-7330, 1998.
PACKING :
Super Sack 1000 lit. Super Sack 35 cft
MS drums 180 lit. Fiber Drums 7 cft
HDPE lines Bags 25 lit. HDPE Lined Bags 1 cft
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available
at our offices.
The data included herein are based on test information obtained by Thermax Limited. These date are believed to be
reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM.
We recommend that the user should determine the performance of the product by testing on his own processing
equipment.